易投配资欢迎您的到來!

Banner
易投配资 > 新聞 > 内容

新聞詳情

News detail

木門雕刻機價格及幅面大小

編輯:易投配资时間:2018-05-16

木門雕刻機的價格是根據雕刻機的配置高低來決定的。


The price of wooden door engraving machine is determined according to the configuration of engraving machine.


木門雕刻機并不是萬能的,雕刻機并不是可以幹所有的活。雕刻機廠家把雕刻機分为各種規格型号,为的就是應付各種不同的加工任务。例如您買一台模具級的雕刻機去雕雙色闆,或買一台大型雕刻機來雕印章,這都造成巨大的浪費,而且也不會獲得好的效果。同樣您買一台廣告級的雕刻機去做模具,則可能根本不能勝任。所以您在購機前,一定要向銷售人員表示清楚您要加工的東西,包括加工工件的大小,材料的材質,材料的厚度、重量、最終雕刻效果及要求等等。


Wooden door engraving machine is not omnipotent, engraving machine is not able to do all the work. The engraving machine is divided into various specifications and models to deal with various processing tasks. For example, if you buy a mold carving machine to carve a double color board, or buy a large engraving machine to carve the seal, it will cause huge waste and will not get good results. You can also buy an AD - level engraving machine to make the mold, which may not be competent at all. Before upgrade, so you must be clear to the sales staff said you to processing, including the size of the machining, material is qualitative, the thickness of the material, weight, finally carving effect and requirements, and so on.


一:木門雕刻機幅面的大小


One: the size of wooden door carving machine.


看木門雕刻機幅面的大小。應根據业务需求和财务狀況選擇,木門雕刻機的型号以及功率不同,價位和适用方面也不一樣。一般小幅面的雕刻機有600毫米×600毫米與600毫米×900毫米兩種,進料寬度一般都是700毫米。如果是需要雕刻雙色闆的話,小幅面雕刻機是最基本的應用,其接納性很好。如果再小一點,雕刻機價格與其相差不多,但雕刻雙色闆时還需要裁闆,麻煩不說還會造成不必要的浪費。大幅面的雕刻機有1200毫米×1200毫米、2000毫米×1500毫米、1500毫米×2400毫米和2400毫米×3000毫米四種,這些機型的雕刻機進科寬度都超過1350mm,現在市面上的有機玻璃和PVC闆的尺寸都是1300mm×2400mm,所以這幾款機型對需求大幅面雕刻機的客戶比較适合。


Look at the size of the wooden door carving machine. Depending on the business needs and financial situation, the model and power of the wooden door engraving machine are different in terms of price and application. In general, the engraving machine has 600 mm x 600 mm and 600 mm x 900 mm, and the feed width is usually 700 mm. If it is necessary to carve a double color board, the small size engraving machine is the most basic application, and its acceptability is very good. If you are a little bit smaller, the engraving machine price is similar to that, but you still need to cut the board when carving the double color board, and it will cause unnecessary waste. Large-format engraving machine with 1200 mm * 1200 mm, 2000 mm * 1200 mm, 1500 mm * 2400 mm and 2400 mm * 3000 mm four, the carving machine feeding width of these models are more than 1350 mm, now on the market of organic glass and the size of the PVC board is 1300 mm * 2400 mm, so these a few model on the demand side carving machine is suitable for the customer.


二:木門雕刻機導軌


Two: wooden door carving machine guide.


要注意木門雕刻機的導軌。大幅面雕刻機一定要采用加寬的進口的方型導軌,其負载能力和精度保持能力是圓型導軌的30倍以上,保證了雕刻機的高質高速。


Pay attention to the guide of wooden door carving machine. The large surface engraving machine must adopt the square guide rail with wide inlet, its load capacity and precision maintaining capacity is more than 30 times that of the circular guide, ensuring the high quality and high speed of the engraving machine.